Hard Drive Life
If I asked you the question: which part of your computer is
the most fragile, what would you say? What if I asked: which
part is most important to you?
Often, the answer to both of these questions is your Hard
Drive.
Your hard drive is likely one the most important things you
own. It contains work data, school data, emails, photos,
music, movies, tax information, etc… Incidentally, the hard
drive is also one of only two moving components in your
computer (the other being your optical drive). The following
is a list of important maintenance and monitoring techniques
you can use to maximize the life of your hard drive and
prevent data loss.
Hard drives are physically fragile – handle with care
Statistics show that 25% of lost data is due to a failure of
a portable drive. (Source: 2001 Cost of Downtime Survey
Results)
Contrary to its seemingly rugged appearance, your hard disk
is a very delicate device that writes and reads data using
microscopic magnetic particles. Any vibration, shock, and
other careless operation may damage your drive and cause or
contribute to the possibility of a failure. This is
especially relevant for notebook users, as they are most at
risk of drive failure due to physical damage, theft, and
other causes beyond their control. That’s why we recommend
regular backup of notebook hard drives, as often as
possible.
Possible solutions include external USB or Firewire drives
(although these are prone to the same risks), desktop
synchronization, or backup at a data center through the web.
Hard drives write data in a non-linear way forcing it to
become fragmented.
When files accumulate on your hard drive, they do not just
get written in a linear fashion. A hard drive writes files
in small pieces and scatters them over the surface. The
fuller your hard drive becomes and the more files you save
and delete the worse file fragmentation can be. Hard drive
access times increase with fragmentation since your drive
must work harder to find all the pieces of the files. The
more fragmented your data is, the harder the actuator arm
has to work to find each piece of a file.
A case in point:
Disk fragmentation is a common problem for users of Outlook
Express and database software. Each time outlook saves new
mail, it does so in a different physical location from the
previous time. This results in extreme fragmentation,
causing longer hard drive access times and forcing more
strain on the heads. This strain can eventually lead to a
head crash, and often that means a virtually unrecoverable
drive.Finally, in the event of a total crash, a fragmented
drive is much more difficult to recover then a healthy
defragged drive.
Luckily, Windows makes it remarkably easy to defrag your
hard drive, simply launch the Disk Defragmenter utility
(Start > Programs > Accessories > System Tools), choose
which disk or partition you’d like to defragment and set it
to work overnight or while you are not actively using your
computer. Defragmentation will speed up your computer and
ensure a longer life for your hard drive.
A very small power surge can fry a hard drive – use a UPS
and turn off your computer when you can
Another little-known fact about the fragility of your hard
drive is its susceptibility to electrical failure. An
electrical failure can be caused by a power surge,
lightening strikes, power brown-outs, incorrect wiring, a
faulty or old power supply, and many other factors. If a
power surge enters your computer, it may do an unpredictable
amount of damage, including destroying your hard drive’s
electronics or crashing the heads and possibly resulting in
total data loss.
The best way to protect your computer from such dangers is
to use a highly rated protected power bar or an
Uninterruptible Power Supply (UPS). Although these devices
won’t eliminate the chances of a crash, they will serve as
effective protection in most cases. Also, you can minimize
the danger of an electrical problem and reduce wear of your
hard drive by turning off your computer or using power-save
modes whenever possible. It’s a known fact that 100% of
drives fail, the question is when will it happen and will
you be prepared? Make sure to check out the knowledgebase
section of our website for more detailed information on how
electrical power affects your computer.
Be SMART, monitor the health of your drive to prevent
unexpected crashes
All modern hard drives have a self-monitoring technology
called SMART (Self Monitoring Analysis & Reporting
Technology). What most people don’t realize is that the
majority of hard drive failures do not have to be
unexpected. Most failures occur as a result of long-term
problems which can be predicted. By regularly monitoring
disk health and performance, you can know about potential
hard drive problems before you lose any of your data.
Several excellent utilities are available, including
DiskView and Stellar SMART for standard IDE and SATA desktop
drives. Also available are tools that monitor the health of
SCSI drives and full RAID Array systems. Ariolic Software
offers a great utility called ActiveSMART.
The only fool-proof way to prevent data loss is... Backup!
If you only take one of the suggestions here to heart, let
it be this one: always back up your important data. After
all the monitoring and all the prevention measures are in
place, one fact still remains: all hard drives fail. Backing
up regularly will ensure that you’re never caught without
your critical data. For individuals, the simplest solutions
include external portable hard drives, dvd’s, and online
storage. For businesses, we recommend renting space at a
secure data centre and implementing a disaster recovery
plan, regardless of the size of your business.
|